NEC NEAX2400 IPX Programming Manual page 459

I-21
Operating Procedure (cont'd)
b.) To answer by using Off-Hook key:
OPERATION
OPERATING CALLED
PARTY PARTY
(1) Receive a
call
(2) Perform the
SHF
(3) Dial the
access code for
IZP [I-21] (IZP
key)
(4) Dial the IZP
group number
Note 3
Voice Call is made from D
speakers in the IZP group.
(1) Lift the
Handset
Two way conversation is made.
(5) Replace the
handset
Two way
conversation
between the
calling and
called party
is made.
Note 1: The number of the chime can be set by ASYD SYS1, Index 321, b7 0/1: 4/1 time (s).
Using Prime Line or Off-Hook to answer is selected by the ASYD SYS1, Index 388, bit 4 0/1: Press Prime
Note 2:
Line key after Off-Hook/Press Off-Hook.
Note 3: The number of digit of IZP group number is determined by SYS1, Index 804, bit 3.
bit 0=0: 2-digit (group 01~99)
bit 0=1: 3-digit (group 001~255) Ex. When IZPG=1, dial 001.
Page 416
Internal Zone Paging
TONE CONTROL
OPERATING CALLED
PARTY PARTY
(1) Special
Dial Tone can
be heard
nd
(2) 2 Dial
Tone can be
heard
(1)Chime(s)
can be heard
Note 1
term
Ex. When IZPG=1, dial 01.
Note 2
CALLING OPERATING
PARTY PARTY
XX:XX DDD2
(1) MSC
XFR
can be
heard
PG
PG GPNO
(2) MSC is
stopped
TERM
D DISPLAY
CALLED
PARTY
PG XXXXX
P: flash
*P=Prime Line
XXXXX XXXXX
P: light
(time) XX:XX DDD2
NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1
CALLING
PARTY