Table of Contents
Advertisement
Operating Procedure (cont'd)
2.
Dial the third party, and the third party is busy; receive busy tone. The LCD of the operating station
displays:
3.
Replace the handset. The station to be set Camp-on by Station hears Warning Tone. The LCD of the
operating party displays:
The LCD display is changed after the trunk receives ringback tone:
The LCD display of the target party:
The trunk party hears ringback tone.
4.
When the target station becomes available, the target station starts to ring. The LCD of the target party
displays:
5.
The target station can call back to the trunk party directly as the station answers the ringing. The LCD of
the target party displays:
ELAPSED TIME for the communication
To answer the Camp-on by Station call from the busy station
1.
After receiving Warning Tone, the third party can answer the call by pressing the ANSWER key. The
original call connected by the third station is placed on hold.
NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1
Call Transfer - All Calls - D
The extension number of the third party
BUSY
(Time Display)
CAMP SET
(Time Display)
(Time Display)
CAMP
(Time Display)
CAMP
(Time Display)
XX:XX (TRK)
(Time Display)
term
XXXX
(TRK)
(TRK): Trunk
kind or the
calling
number
(TRK)
(TRK): Trunk
kind or the
calling
number
(TRK): Trunk
kind or the
calling
number
C-11D
Page 167
Advertisement
Table of Contents
