Table of Contents
Advertisement
F-5D
F-5D
General Description
term
This feature enables D
only), or ringing (night only).
Operating Procedure
No manual operation is required once FLEXIBLE RINGING ASSIGNMENT has been programmed in system data.
Service Conditions
1.
Recall ringing supersedes all ringing possibilities and will ring regardless of other programming.
2.
Incoming Central Office ringing supersedes internal calls and will interrupt internal call ringing while it
is in progress.
3.
Recall ringing, Central Office ringing, and internal call ringing all vary. Refer to DISTINCTIVE
RINGING [D-10].
Interactions
The following ASYD assignments are for normal ringer patterns. For more information, refer to DISTINCTIVE
RINGING [D-10].
Programming
STEP 1:
ASYD - System Data 3, Indexes 0 & 1. Assign Index 0 as 21 for 1 second ON, 2 seconds OFF (trunk
calls). Assign Index 1 as "42" for 2 seconds ON, 4 seconds OFF (station calls).
STEP 2:
AKYD - Assign the station according to the following parameters:
TN:
1
STN:
Station Number
TP:
Type of D
RING:
0: No Ringing
1: Ringing All Lines
2: Ringing on Prime Line Only
3: Flexible Ring Assignment, enables RG parameter.
KYN: Key Number (1-40)
KYI:
Service Index
0: Key Not Used
1: Feature Key
2: Multi-line Key
KD:
Not assigned for Feature Key
TN:
TN Number
STN:
Station Number
Page 356
Flexible Ringing Assignment - D
Flexible Ringing Assignment - D
line appearances to be individually programmed for ringing, not ringing, ringing (day
term
0/1:
term
term
NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1
Advertisement
Table of Contents
