Table of Contents
Advertisement
Service Conditions (cont'd)
8.
If the station's own telephone number is set for CALL FORWARDING - ALL CALLS, this feature is
changed to CALLING PARTY RECOGNITION SERVICE (CALL FORWARDING - ALL CALLS)
[C-103].
9.
When the user setting CALL FORWARDING - ALL CALLS goes off-hook, special dial tone can be
provided instead of dial tone. (Activation of this service is determined by system data.)
10.
The OAI monitor number and the ACD pilot number cannot be assigned as the Call Forwarding target
telephone number except when called from a station or Tie Line trunk.
11.
When a destination of CALL FORWARDING-ALL CALLS has already been assigned, even if the feature
is restricted by the new office data or changing of Day/Night mode, the assigned data can still be used or
cancelled.
12.
A telephone number must be set to the call forwarding destination.
13.
This feature is not available for stations having a telephone number of seven digits or more.
14.
A call can be forwarded to an Attendant Console in the remote node via FCCS link.
Attendant
Console B
15.
When a call is forwarded through FCCS link, the numbering plans of the originally called station and the
forwarded Attendant Console must be the same.
Interactions
1.
Users are unaccustomed to hearing ringback tone when responding to their own station's ring. Inform
users when providing ringback tone with CALL FORWARDING-ALL CALLS in System Data 1, Index
69, Bit 1.
2.
Call Forwarding can only be activated from an idle station.
3.
When CALL WAITING [C-12, 31], ATTENDANT CAMP-ON [A-1], and CALL BACK [C-1]are
directed toward Station A, with CALL FORWARDING set to Station B, Station B will receive Call
Waiting Tone.
4.
When a station in a STATION HUNTING [S-7, 8, 9] Group initiates CALL FORWARDING-ALL
CALLS, calls normally destined for this station will not be received. The Hunt Group operates as if the
station were busy.
5.
A non-controlling UCD station is allowed to activate CALL FORWARDING-ALL CALLS. With this
station call forwarded, only calls that are directly dialed to this station are call forwarded. The member
station is removed from the UCD group under the conditions of this call forwarding feature.
6.
If an Attendant attempts BUSY VERIFICATION [B-3] to Station A, which has CALL FORWARDING-
ALL CALLS set to Station B, BUSY VERIFICATION [B-3] proceeds as if the Attendant had attempted
to Verify Station B. If Station A has set CALL FORWARDING-ALL CALLS to the Attendant Console,
BUSY VERIFICATION [B-3] is allowed at Station A if Station A were busy.
NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1
Call Forwarding - All Calls
A
Node
FCCS Link
B
Node
TK
Station A has been set
Call Forwarding service to
Attendant Console B
C-5
Page 131
Advertisement
Table of Contents
