Table of Contents
Advertisement
C-74
Service Conditions (cont'd)
b.) When originating a call from a trunk: Restriction for tandem connections between the incoming
trunk and the outgoing trunk selected for the call where this feature occurs.
10.
There is no limit to the number of stations that may activate this feature simultaneously.
11.
When the called station does not answer for a predetermined time interval, this feature is applied according
to the Route Restriction Class of the originating station and the trunk used in Call Forwarding. When
restricted by Route Restriction Class, CALL FORWARDING - DON'T ANSWER - OUTSIDE is not
activated, and the called station continues to ring.
12.
Call Transfer - Attendant: When the called station does not answer for a predetermined time interval, calls
which have been transferred by the Attendant are assigned to this feature according to their Route
Restriction Class. When calls are restricted by Route Restriction Class, this feature is not activated, and
the called station continues to ring.
13.
When Attendant transfers a call to a station that has set CALL FORWARDING - DON'T ANSWER -
OUTSIDE, TOLL DENIAL/TOLL DIVERSION [T-6] is not activated.
14.
When a caller places a call via OGCA (Outgoing Call Alternative) and when the first outgoing route and
the calling party are restricted, this service cannot be set. In this case, the service can be set via the
following procedure:
a.) assign a dummy route,
b.) clear the restriction between the dummy route and all the stations,
c.) assign the dummy route as the first route of OGCA.
15.
This feature is not available for the trunk calls by the MF signals. In this case, the call is not forwarded to
the designated station.
16.
This feature is not available for the trunk calls by MF signals. In this case, the call is not forwarded to the
designated station.
17.
A call can be forwarded to a trunk in the remote node via FCCS link.
18.
A maximum of 24 digits, including trunk access code, can be stored.
Programming
STEP 1:
ASYD - System Data 1, Index 20, Bit 7. Charging to a call transferred by Call Forwarding-Outside
Service 0/1: Charging is made to the caller of the transferred call/Charging is made to the station that
has set Call Forwarding-Outside Service.
STEP 2:
ASFC - Assign SFI 25 for CALL FORWARD outside to local or SFI 26 CALL FORWARD outside
to long distance. Also assign SFI = 151 when CALL FORWARDING - OUTSIDE is performed, RSC
of the forwarding station is used.
See CALL FORWARDING-DON'T ANSWER [C-3].
FCCS Programming
No unique programming is required for the FCCS network.
Page 232
Call Forwarding - Don't Answer - Outside
NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1
Advertisement
Table of Contents
