Table of Contents
Advertisement
Service Conditions (cont'd)
18.
When a station sets CALL FORWARDING - ALL CALLS [C-5] to a pilot in a Hunt Group, and the pilot
activates CALL FORWARDING - BUSY LINE to another station, if the system parameters define the call
to hunt to the forwarded-to Station Hunt Group and all stations are busy, the calling party will hunt at the
called station's Hunt Group. If system parameters assign the call to hunt to the forwarding Station Hunt
Group and all stations are busy, the calling party will then hunt to the forwarding station's Hunt Group.
19.
This service feature can be restricted according to the service restriction class of the D
after the CALL FORWARDING - BUSY LINE [C-2] has been set to a D
to the multi-line cannot be transferred if the service restriction class of the MY Line restricts this service
feature.
20.
A user may set CALL FORWARDING - BUSY LINE - D
CLASS OF SERVICE - INDIVIDUAL [C-15], as assigned to the station setting the service. The figure
below is a simplified key sheet assignment for stations 200 & 201. The CLASS OF SERVICE -
INDIVIDUAL [C-15] for station 200 is allowed CALL FORWARDING - BUSY LINE - D
CLASS OF SERVICE - INDIVIDUAL [C-15] for station 201 is not. Station 200 is able to set CALL
FORWARDING - BUSY LINE - D
will illuminate.
FORWARD-BY
The FORWARD-BY key is same as the CALL FORWARDING - BUSY LINE feature key.
Note:
Even when a sub-line of D
Line of that D
21.
This feature is applicable to CALL FORWARDING - OUTSIDE [C-28] and CALL FORWARDING/
MULTIPLE CALL FORWARDING - BUSY LINE - CCIS [C-46] [M-41].
22.
When a user places a call to a busy station which has been set CALL FORWARDING-BUSY LINE [C-
2], the calling party can override the call forwarding feature, activating service features associated with
busy status such as CALL BACK [C-1], EXECUTIVE RIGHT-OF-WAY [E-1], STEP CALLS [S-13],
provided that the service feature class (SFC) of the calling party permits this feature. Otherwise, the call
is forwarded to a predetermined destination as usual.
23.
This service is not available when the called party is the attendant console or monitoring station. However,
the service is available when these stations are designated as the transfer destination of CALL
FORWARDING - BUSY LINE service.
24.
This service is available only when the called party is busy and has set CALL FORWARDING - BUSY
LINE. In case CALL FORWARDING - BUSY LINE is set as the second hop and after in the Multiple
Call Forwarding link, this service is not available.
25.
This service is available in the following occasions:
a.) When the destination of the CALL FORWARDING - BUSY LINE service is the calling station.
NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1
Call Forwarding - Busy Line - D
term
Station 200
MY LINE
term
is assigned as the destination station, the call is not forwarded if the MY
term
is not allowed CALL FORWARDING - DON'T ANSWER - D
term
for station 201. The associated feature button LED on station 201
FORWARD-BY
MULTI-LINE
term
term
term
multi-line, incoming calls
for a multi-line appearance based on the
Station 201
MY LINE
term
.
C-2D
MY Line. Even
term
, but the
MULTI-LINE
Page 117
Advertisement
Table of Contents
