Table of Contents
Advertisement
A-18
FCCS Programming
This data setting describes only the additional or replacement commands used to activate FCCS
services. When used as an FCCS feature, these commands replace the non-network commands (for
example, AAED is replaced by AAEDN). Note that the data setting for FCCS service varies depending
on the node.
STEP 1:
ANPDL - Reserve a number level for service feature access. Assign Connection Index, CI = N, H, B;
Normal (N), Hooking (H), and Busy (B) (applicable to any service feature assigned to this level).
Assign NND in accordance with a predetermined numbering plan.
STEP 2:
ASPAL - For SRV = SSC (Service Code) SID = 41, assign the access code. Assign the number of
digits in the ASPAL service feature access code plus the number of digits that will appear in the
ACCOUNT CODE for the NND parameter. When ACCOUNT CODE operates with
AUTHORIZATION CODE [A-20], the above assignment is omitted. In ASPAL, assign for SRV =
SSC (Service Code), SID = 42. The NND value will include the number of digits in the ASPAL
service feature access code plus the number of digits that appear in the ACCOUNT CODE.
Note:
When using ASYDL or ASYDN to program an FCCS feature, the basic programming of ASYD is required
in addition to ASYDL or ASYDN.
Page 26
Note
Account Code
NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1
Advertisement
Table of Contents
