Table of Contents
Advertisement
M-34D
General Description
term
This feature allows a D
Operating Procedure
To activate MESSAGE REMINDER - CCIS from a D
1.
Lift the handset; receive dial tone.
2.
Dial the desired D
3.
Press MSG key; receive service set tone. The LCD displays:
At the called D
To activate MESSAGE REMINDER - CCIS from a D
1.
Lift the handset; receive dial tone.
2.
Dial the desired D
3.
Dial the VOICE CALL [V-2] access code; VOICE CALL is activated. The LCD displays:
4.
Press MSG key; receive service set tone. The LCD displays:
At the called D
To review the message
1.
Press MSG key while idle. The LCD displays:
2.
Press MSG key successively to review other messages (maximum 4 messages in total).
To return the message
1.
While the desired message is displayed, lift handset or press SPEAKER key; receive dial tone.
2.
Press MSG key; the calling station is automatically redialed. If any other message is not returned, the
MESSAGE LED will still be lit.
NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1
Message Reminder - D
Message Reminder - D
to leave a MESSAGE REMINDER at a D
term
at the distant office; receive ringback tone or busy tone.
MESSAGE SET
term
, the MESSAGE LED will light to indicate a message has been left.
term
at the distant office; receive ringback tone.
MESSAGE SET
MESSAGE REST
term
, the MESSAGE LED will light to indicate a message has been left.
Calling Station
MESSAGE
XXXX
term
- CCIS
term
in a different node in the CCIS network.
term
to an idle or busy D
(Time Display)
term
to an idle or busy D
(Time Display)
(Time Display)
hr.
min.
XX: XX
(Time Display)
term
- CCIS
term
XXXX
term
after activating a VOICE CALL
XXXX
XXXX
AM/PM
AM
M-34D
Page 937
Advertisement
Table of Contents
