Table of Contents
Advertisement
S-7
FCCS Programming (cont'd)
STEP 2:
ASHCN - This data must be assigned to the NCN.
Assign the Circular Hunt Group using Telephone Number.
UGN:
TELN:
First TELN:
SECRETARY TELN:Secretary Telephone Number
STEP 3:
APHNN - Assign Phantom Telephone Number (PHTELN) to each Circular Hunt Station
UGN:
TELN:
PH:
PHTELN:
Note 1:
When using ASYDL or ASYDN to program an FCCS feature, the basic programming of ASYD is required
in addition to ASYDL or ASYDN.
Multiple PHTELNs (maximum of 16) can be assigned per TELN. Select whether to use each PHTELN for
Note 2:
station hunt or not by the "PH" parameter.
Page 658
Station Hunting - Circular
User Group Number
Telephone Number in the Circular Hunt Group
First assigned Telephone Number
User Group Number
Telephone Number of the Circular Hunt Group
Phantom Number mode
0 = Used individually
1 = Used as the pilot number (for station hunting)
Phantom Telephone Number
Note 2
NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1
Advertisement
Table of Contents
