NEC NEAX2400 IPX Programming Manual page 351

D-90D
General Description (cont'd)
DELAYED RINGING may also be used for calls terminated to single-line telephone appearances on a D
to single line appearances that are not answered within a preprogrammed time will ring on the next station in
sequence.
a.) An incoming call:
b.) After the first
preprogrammed time:
c.) After the second
preprogrammed time:
A call rings on Single Line Station A. If Station A does not answer within a preprogrammed time, the call also rings
term
on D Station B. If the call is not answered within the second preprogrammed time, the call also rings on D
Station C.
Operating Procedure
No manual operation of the feature is required after it has been programmed in system data.
Service Conditions
1. This feature is available for multi-lines on D
2. Delay timing for each line on the D
3. Delay timing may be 10, 20, or 30 seconds.
Interactions
1. Off-hook ringing on a D
same as on-hook ringing.
2. Stations that have multi-line appearances with DELAYED RINGING-D
the interaction with CALL FORWARDING-DON'T ANSWER [C-2]. Example: Station A appears on
term
D B with a delayed ringing of 30 seconds (RG = 4); and also on D
of 20 seconds (RG = 5). If Station A sets CALL FORWARDING-DON'T ANSWER [C-2] and the CALL
FORWARDING-DON'T ANSWER [C-2] timer is set at 24 seconds, when an incoming call comes into
Station A, it will begin to ring; at 20 seconds D
forward to Station A's target destination and Station A and D
3. After a call has been answered by a secretary, the activation of the boss/secretary feature by the secretary
to a single-line boss station will not reactivate the DELAYED RINGING-D
Page 308
Delayed Ringing - D
Ringing
Single Line Station
Ringing
Single Line Station
Ringing
Single Line Station
term
may be programmed through the MAT.
term
will follow the assigned DELAYED RINGING-D
term
Indication
A
term
D Station B
Ringing
A
term
D Station B
Ringing
A
term
D Station B
term
s.
term
C will begin to ring also; at 24 seconds the call will
term
C will stop ringing. D
NEAX2400 IPX Feature Programming Manual
Indication
A
term
D Station C
Indication
A
term
D Station C
Ringing
A
term
D Station C
term
[D-90D] timer the
term
assigned must be aware of
term
C with a delayed ringing time
term
B never rings.
term
cycle.
NDA-24297, Issue 1
term
. Calls
term