Table of Contents
Advertisement
M-44
General Description
This feature permits a call to a CALL FORWARDING - ALL CALLS station to be forwarded multiple times to a
predesignated idle station.
Operating Procedure
To set from an individual station
1.
Lift the handset; receive dial tone.
2.
Dial the specific CALL FORWARDING - ALL CALLS access code; receive special dial tone.
3.
Dial the desired target telephone number; receive service set tone.
To cancel from an individual station
1.
Lift the handset; receive dial tone.
2.
Dial the specific CALL FORWARDING - ALL CALLS cancel code; receive service set tone.
To set from the ATTENDANT CONSOLE [A-3]
1.
Press an idle loop key.
2.
Dial the specific CALL FORWARDING - ALL CALLS access code; receive special dial tone.
3.
Dial the TENANT [T-12] number (2 or 3 digits).
4.
Dial the originating telephone number.
5.
Dial the desired target telephone number; receive service set tone.
To cancel from the ATTENDANT CONSOLE [A-3]
1.
Press an idle loop key.
2.
Dial the specific CALL FORWARDING - ALL CALLS cancel code; receive special dial tone.
3.
Dial the TENANT [T-12] number (2 or 3 digits).
4.
Dial the originating telephone number; receive service set tone.
Service Conditions
1.
If CALL FORWARDING - ALL CALLS [C-5] is set at the called station, the call is forwarded to a
designated station that has set CALL FORWARDING-ALL CALLS [C-5] or CALL FORWARDING-
BUSY LINE [C-2].
2.
A call can be forwarded a maximum of five times by MULTIPLE CALL FORWARDING - ALL CALLS
[C-5], and only by the voice port of a D
3.
A call will not forward any farther than the station to where it has been forwarded to.
4.
If a forward destination is busy, and if neither CALL FORWARDING - BUSY LINE [C-2] nor CALL
FORWARDING - ALL CALLS [C-5] is set, the caller hears a busy tone.
5.
If the originating station is designated as the forward destination, the call will not be forwarded.
6.
CALL FORWARDING - BUSY LINE [C-2] and CALL FORWARDING - ALL CALLS [C-5]
combination:
a.) A maximum of five forwarding operations can be performed by any combination of CALL
FORWARDING-ALL CALLS [C-5] AND CALL FORWARDING-BUSY LINE [C-2].
b.) If the fifth forward destination is busy, the call will forward if CALL FORWARDING - DON'T
ANSWER [C-3] is set. Otherwise, the caller will hear a busy tone.
NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1
Multiple Call Forwarding - All Calls
Multiple Call Forwarding - All Calls
term
, or by a single line telephone.
M-44
Page 515
Advertisement
Table of Contents
