Table of Contents
Advertisement
FCCS Programming (cont'd)
CI:
SID:
STEP 3:
ANPDN - These data must be assigned to the NCN.
TN:
1st DC:
CI:
NND:
BLF:
STEP 4:
ARTDN - These data must be assigned to the NCN.
LGRT:
Assign CDN 9:TQ, Trunk Queuing Service = 1
Note 1:
When using ASYDL or ASYDN to program an FCCS feature, the basic programming of ASYD is required
in addition to ASYDL or ASYDN.
Note 2:
The current data should also be set in addition the above-mentioned command.
The command to be set to the node that accommodates the trunk: ARTD
The command to be set to all the nodes: ASFC, AKYD
NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1
Outgoing Trunk Queuing
N = Normal
20 = OG Queuing-Cancel
Tenant
1st Digit
Normal (N), Hooking (H) and Busy (B)
Number of Necessary Digits
Busy Lamp Field
Logical Route Number
O-2
Page 555
Advertisement
Table of Contents
