NEC NEAX2400 IPX Programming Manual page 716

Feature programming manual

Hide thumbs Also See for NEAX2400 IPX:

Table of Contents

Service Conditions (cont'd)

When a line connection is established on the FCCS link, the billing data concerned is collected fully in the

called station-side node, not in the calling station side. The collected data is then transmitted to the SMDR

terminal as the call finishes.

Multiple Center Nodes can be assigned on a FCCS network for centralized billing purposes.

Transmission of call base table with 220 bytes.

Since Release 5 software, when the user performs system changeover (using MBR key, CMOD command

or etc.), system massages (26-V, 26-W) are displayed. However, there are no defective conditions.

The figures on the following pages show the Service Conditions of Polling Method, focusing on when

CCIS links are involved.

Node A (Fusion - Center Node) Collects the billing information of Nodes B and C via FCCS using the

polling method.

: Fusion Call Control Signal (FCCS)

: Common Channel Inter-Office Signaling (CCIS)

NEAX2400 IPX Feature Programming Manual

NDA-24297, Issue 1

Station Message Detail Recording (SMDR)

FCCS - Center Node

Billing information of

FCCS Network

Billing information of Node B