Table of Contents
Advertisement
T-12
Programming (cont'd)
STEP 3:
ATRK - Assign the Attendant Consoles to receive incoming trunks according to tenant. The TN
parameter will determine which specific tenants this Attendant Console will handle. Example: In a
three-tenant system, the Attendant Console will handle tenants 1 and 3. Assign the following:
RT:
901
LENS: 000200
CNT: 2
CNT: 2
STEP 4:
MBTK - Make idle the Attendant Console trunks.
FCCS Programming
No unique programming is required for the FCCS network.
Page 766
2:
Not used.
3:
Allows the CALL FORWARDING-ALL CALLS, DON'T ANSWER, and
BUSY LINE on an intra and inter-tenant basis as when set by the Attendant
Console.
4:
Allows or restricts incoming calls to the Attendant Console on a per-tenant
basis. Thus, an Attendant Console may handle calls only for a specific tenant.
5:
Day/Night Mode Change Restriction is not used in North America.
6:
Not Used.
7:
Not Used.
TK:
1
1
TN:
1
2
TN:
3
Tenant Service
RSC:
0
SFC:
0
NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1
Advertisement
Table of Contents
