Table of Contents
Advertisement
F-3D
F-3D
General Description
This feature provides for a D
BUTTON. The FLASH BUTTON will function in the manner a switch hook flash does for a single-line set.
Operating Procedure
When activating features common to both D
1.
Press the FLASH BUTTON to receive special dial tone,
2.
Dial the access code of the desired feature.
Service Conditions
1.
When using the FLASH BUTTON, the feature will not be activated again until digits are dialed. The
FLASH BUTTON may function during a two-way connection.
Note:
If a transfer is attempted via the FLASH BUTTON, three-way conference will be established by pressing the
FLASH BUTTON again. To retrieve the original connection after the connection with the transferred
station, the TRANSFER key should be pressed.
2.
The FLASH BUTTON is optional. Its use in various features will be explained throughout this document.
Interactions
1.
This feature provides switch hook flash capabilities to a D
ASPA. The features in which a FLASH key are used include CALL BACK [C-1] and OUTGOING
TRUNK QUEUING [O-2]. The FLASH BUTTON is usually required with the 4-button D
2.
See ASYD, System Data 3, Index 2 for programming the characteristics of a switch hook flash (Hooking).
Programming
STEP 1:
AKYD - When assigning key data for the D
TN:
1
STN:
Station Number
TP:
Type of D
RING:
0: No Ringing
1: Ringing All Lines
2: Ringing on Prime Line Only
3: Flexible Ring Assignment, enables RG parameter.
KYN: Key Number (1-40)
KYI:
Service Index
0: Key Not Used
1: Feature Key
2: Multi-line Key
KD:
Not assigned for Feature Key
KYN: Feature key Number
FKY
= 21, FLASH BUTTON
Page 352
Flash Button - D
Flash Button - D
term
set to program one of the programmable line/feature keys to function as a FLASH
term
and single-line sets
term
0/1:
term
term
term
with a Connection Index (CI) of Busy. See
term
, assign the following:
NEAX2400 IPX Feature Programming Manual
term
.
NDA-24297, Issue 1
Advertisement
Table of Contents
