NEC NEAX2400 IPX Programming Manual page 408

Service Conditions (cont'd)
5. Following data assigned to each D
DO NOT DISTURB
LAST NUMBER CALL
MESSAGE REMINDER
SAVE AND REPEAT
6. This service is not available for the following stations:
a.) Night station (ACSI)
b.) HOT LINE [H-1] station
c.) HOUSE PHONE [H-2]
d.) Data line, or D
e.) Station setting/being set CALL BACK [C-1] or OUTGOING TRUNK QUEUING [O-2]
f.) Stations where following services are set:
CALL FORWARDING - ALL CALLS
CALL FORWARDING - BUSY LINE
CALL FORWARDING - DON'T ANSWER
MESSAGE WAITING INDICATION - D
g.) DIT [D-7]
term
h.) D calling from a sub-line.
i.) Station which has set or has been set for Busy service.
The service is available after the message is cancelled.
Note:
7. The following information is swapped when this service is activated:
ITEM
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
Note 1: The Add-On Module key information of D
Note 2: There are some hardware/firmware limitations in order to swap all the Speed Calling key information. The
Speed Calling key assigned in the feature keys does not swap.
NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1
Follow Phone
term
will be cleared when this service is activated:
term
that has a data line assigned
DATA SWAPPED IN FOLLOW PHONE SERVICE
Feature key information
Add-On Module key information
Flexible line/feature key information
Speed Calling - One Touch data
Intercom information (Automatic, Manual, Dial)
Telephone Number
Route Restriction Class
Service Class
Speed Calling - Group/Station data
Phantom Number
Name Display information
term
Note 1
Note 2
term
does not swap.
[D-11]
[L-6]
[M-19]
[S-24]
[C-5]
[C-2]
[C-3]
[M-85D]
STATION TYPE
TERM
SINGLE LINE D
Not Available Available
Not Available Available
Not Available Available
Not Available Available
Not Available Available
Available Available
Available Available
Available Available
Available Available
Available Available
Available Available
F-31
Page 365