Table of Contents
Advertisement
Operating Procedure (cont'd)
When the destination is an outside trunk, the D
To cancel Call Forwarding from an individual station (D
1.
Cancelling Call Forwarding for an incoming call from a station:
a.) Confirm that the PAGE (One-Touch Changeover) lamp is on; if the lamp is off, turn the lamp on
by pressing the PAGE key.
b.) Lift the handset or press the SPEAKER key; receive service set tone.
c.) Press the FORWARD, FORWARD-BY, or FORWARD-DA key; receive service set tone. The
LCD displays:
The FORWARD, FORWARD-BY, or FORWARD-DA lamp turns off.
d.) Replace the handset or press the SPEAKER key.
2.
Cancelling Call forwarding for an incoming call from an outside party:
a.) Confirm that the PAGE lamp is off; if the lamp is on, turn the lamp off by pressing the PAGE
key.
b.) Lift the handset or press the SPEAKER key; receive dial tone.
c.) Press the FORWARD, FORWARD-BY, or FORWARD-DA key; receive service set tone. The
LCD displays:
Also, the FORWARD, FORWARD-BY, or FORWARD-DA lamp turns off.
d.) Replace the handset or press the SPEAKER key.
To monitor the assigned data using the D
1.
To monitor the assigned data for calls from incoming trunks (outside):
a.) Confirm that the LED of the PAGE feature key on the D
illuminated, press PAGE key to turn it off.)
b.) While the D
BUSY LINE or DON'T ANSWER feature key.
When the destination is a station, the D
NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1
Split Call Forwarding
FORWARD SET
(Time Display)
FORWARD CANCEL
(Time Display)
FORWARD CANCEL
(Time Display)
term
feature key
term
is in the idle state (on-hook), press the CALL FORWARDING - ALL CALLS/
FORWARD
XXXXX
(Time Display)
term
displays:
XXXXX
term
)
term
displays:
term
is not illuminated. (If it is
S-99
Page 717
Advertisement
Table of Contents
