I/O Parameters [M8]; Data In Port; Data In Dev.; Tape Mode Port - Mitsubishi Electric M800 Series Manual

M800/M80/E80/C80 Series Alarm/Parameter Manual
15 User Parameters

15.5 I/O Parameters [M8]

#9001

DATA IN PORT

[M8]
Select the port for inputting the data such as machine program and parameters.
1: ch1
2: ch2
#9002

DATA IN DEV.

[M8]
Select the device No. for inputting the data. (The device Nos. correspond to the input/output device param-
eters.)
---Setting range---
0 to 4
#9003 DATA OUT PORT
[M8]
Select the port for outputting the data such as machine program and parameters.
1: ch1
2: ch2
#9004 DATA OUT DEV.
[M8]
Select the device No. for outputting the data. (The device Nos. correspond to the input/output device param-
eters.)
---Setting range---
0 to 4
#9005

TAPE MODE PORT

[M8]
Select the input port for running with the tape mode.
1: ch1
2: ch2
#9006 TAPE MODE DEV.
[M8]
Select the device No. to be run with the tape mode. (The device Nos. correspond to the input/output device
parameters.)
---Setting range---
0 to 4
#9007 MACRO PRINT PORT
[M8]
Select the output port used for the user macro DPRINT command.
1: ch1
2: ch2
9: Memory card
#9008 MACRO PRINT DEV.
[M8]
Select the device No. used for the DPRINT command. (The device Nos. correspond to the input/output de-
vice parameters.)
---Setting range---
0 to 4
229 IB-1501279-H