M800/M80/E80/C80 Series Alarm/Parameter Manual
15 User Parameters
#9422
DEV3 EIA CODE ]
[M8]
Set the code in hexadecimal, which does not duplicate the existing EIA codes, for the special code " ] ".
When output with EIA code, data can be output using the alternate code in which the special ISO code, not
included in EIA, is specified.
---Setting range---
0 to FF (hexadecimal)
#9423
DEV3 EIA CODE #
[M8]
Set the code in hexadecimal, which does not duplicate the existing EIA codes, for the special code "#".
When output with EIA code, data can be output using the alternate code in which the special ISO code, not
included in EIA, is specified.
---Setting range---
0 to FF (hexadecimal)
#9424
DEV3 EIA CODE *
[M8]
Set the code in hexadecimal, which does not duplicate the existing EIA codes, for the special code "*".
When output with EIA code, data can be output using the alternate code in which the special ISO code, not
included in EIA, is specified.
---Setting range---
0 to FF (hexadecimal)
#9425
DEV3 EIA CODE =
[M8]
Set the code in hexadecimal, which does not duplicate the existing EIA codes, for the special code "=".
When output with EIA code, data can be output using the alternate code in which the special ISO code, not
included in EIA, is specified.
---Setting range---
0 to FF (hexadecimal)
#9426
DEV3 EIA CODE :
[M8]
Set the code in hexadecimal, which does not duplicate the existing EIA codes, for the special code " : ".
When output with EIA code, data can be output using the alternate code in which the special ISO code, not
included in EIA, is specified.
---Setting range---
0 to FF (hexadecimal)
#9427
DEV3 EIA CODE $
[M8]
Set the code in hexadecimal, which does not duplicate the existing EIA codes, for the special code "$".
When output with EIA code, data can be output using the alternate code in which the special ISO code, not
included in EIA, is specified.
---Setting range---
0 to FF (hexadecimal)
#9428
DEV3 EIA CODE !
[M8]
Set the code in hexadecimal, which does not duplicate the existing EIA codes, for the special code "!".
When output with EIA code, data can be output using the alternate code in which the special ISO code, not
included in EIA, is specified.
---Setting range---
0 to FF (hexadecimal)
IB-1501279-H
246