M800/M80/E80/C80 Series Alarm/Parameter Manual
15 User Parameters
15.7 Ethernet Parameters
(PR)
#1926
Global IP address
Set the main CPU's IP address.
Set the NC IP address seen from an external source.
---Setting range---
Set these parameters in accordance with the network rules in the connection environment.
(PR)
#1927
Global Subnet mask
Set the subnet mask for the IP address.
---Setting range---
Set these parameters in accordance with the network rules in the connection environment.
(PR)
#1928
Global Gateway
Set the IP address for the gateway.
---Setting range---
Set these parameters in accordance with the network rules in the connection environment.
(PR)
#1934
Local IP address
[M8]
Set the HMI side CPU's IP address.
---Setting range---
Set these parameters in accordance with the network rules in the connection environment.
[C80]
Not used.
(PR)
#1935
Local Subnet mask
[M8]
Set the HMI side CPU's subnet mask.
---Setting range---
0.0.0.0 to 255.255.255.255
[C80]
Not used.
(PR)
#1937
NET1 IP Address
[M8]
Specify the IP address of the file server (NFS server).
If "0.0.0.0" is set in this parameter, network drive (NET1) cannot be used (disabled).
---Setting range---
0.0.0.0 to 255.255.255.255
[C80]
Not used.
(PR)
#1938
NET2 IP Address
[M8]
Specify the IP address of the file server (NFS server).
If "0.0.0.0" is set in this parameter, network drive (NET2) cannot be used (disabled).
---Setting range---
0.0.0.0 to 255.255.255.255
[C80]
Not used.
IP address
Subnet mask
Gateway
NET1 IP address
NET2 IP address
255
IB-1501279-H