M800/M80/E80/C80 Series Alarm/Parameter Manual
15 User Parameters
(PR)
#1939
NET3 IP Address
[M8]
Specify the IP address of the file server (NFS server).
If "0.0.0.0" is set in this parameter, network drive (NET3) cannot be used (disabled).
---Setting range---
0.0.0.0 to 255.255.255.255
[C80]
Not used.
(PR)
#1940
NET4 IP Address
[M8]
Specify the IP address of the file server (NFS server).
If "0.0.0.0" is set in this parameter, network drive (NET4) cannot be used (disabled).
---Setting range---
0.0.0.0 to 255.255.255.255
[C80]
Not used.
#1941
Local time compen
[M8]
Files stored on file server are managed based on the system time (GMT: Greenwich Mean Time).
This parameter is used to specify the correction time for converting the time obtained through custom API
library from the system time basis to local time basis.
When this parameter is set to 0, the NC determines the correction time based on the language selected by
"#1043 lang".
---Setting range---
-12 to 12 [hour]
[C80]
Not used.
(PR)
#1953
Intra IP address
[M8]
Specify the IP address on the windows-less display unit (LAN1) side.
---Setting range---
Set these parameters in accordance with the network rules in the connection environment.
[C80]
Not used.
(PR)
#1954
Intra Subnet mask
[M8]
Specify the IP address of subnet mask on the windows-less display unit (LAN1) side.
---Setting range---
Set these parameters in accordance with the network rules in the connection environment.
[C80]
Not used.
(PR)
#1955
Intra Gateway
[M8]
Specify the gateway IP address on the windows-less display unit (LAN1) side.
---Setting range---
Set these parameters in accordance with the network rules in the connection environment.
[C80]
Not used.
IB-1501279-H
NET3 IP address
NET4 IP address
Local time correction
IP address on windows-less display unit (LAN1) side
Subnet mask on windows-less display unit (LAN1) side
Gateway on windows-less display unit (LAN1) side
256