Device Open Parameters - Mitsubishi Electric M800 Series Manual

M800/M80/E80/C80 Series Alarm/Parameter Manual
16 Machine Parameters

16.22 Device Open Parameters

(Note) This parameter description is common for M800/M80 Series.
It is written on the assumption that all option functions are added.
Confirm with the specifications issued by the machine tool builder before starting use.
#40001- Device Open Parameters
40100
<Data typ>
Set the data format (BYTE, WORD, DWORD, WORD(BIT)) of the assignment area.
0:WORD
1:DWORD
2:BYTE
3:WORD(BIT)
<Data no>
Set the number of data in the assignment area. The number to be designated varies depending on the unit
designated by the data format.
0 to 3000
(Depends on the device assignment and data format.)
<Disp typ>
Designate the status of data display format, display restrictions and input protection.
bit0: Cancellation of protection for input
Select whether to check the input protection for the data protection key 2 on the group details screen.
(Note) The name of data protection key differs between machine tool builders. Refer to manuals issued by
each machine tool builder for details.
0: Check
1: Not check
bit1: Cancellation of restriction on display
Select whether to display the group details screen even when a machine tool builder password is not entered.
0: Not display
1: Display
bit4: BCD format
Display the data of the group details screen in BCD format.
0: Invalid
1: Valid
bit5: BIT format
Display the data of the group details screen in BIT format.
0: Invalid
1: Valid
bit6: HEX format (Hexadecimal format)
Display the data of the group details screen in HEX format.
0: Invalid
1: Valid
bit7: Sign (Decimal format only)
Select whether to display the data of the group details screen in a decimal format with/without a sign.
0: With sign
1: Without sign
IB-1501279-H 658