M800/M80/E80/C80 Series Alarm/Parameter Manual
3 Servo/Spindle Alarms (S)
3.5 Servo Warnings (S52)
Servo warning is displayed in the following format.
S S
Alarm class
S52
The numerical value in the column of "No." in the table after the following page is the double-digit number displayed
on the LED which is on the front-side of the drive unit.
At the time of the occurrence of the servo warnings (S52), this number will be displayed in the last two digits of the
"alarm number".
(Note) For the troubleshooting at the time of the occurrence of the servo warnings, refer to your drive unit's instruc-
tion manual.
IB-1501279-H
0 0
Message
Servo warning
Axis name
Servo : Axis name
Spindle : "S1", "S2", "S3" ...
Alarm No.
Message
Alarm class
60