Cycle Switch; Cycle Highlight; Touchop Longtaptim; Simple Program On - Mitsubishi Electric M800 Series Manual

M800/M80/E80/C80 Series Alarm/Parameter Manual
15 User Parameters
(PR) #8992

Cycle switch

[M8]
Switch the selectable cycle type.
0: Standard/Extended cycle
1: Not used
2: Not used
[C80]
Not used.
#8993

Cycle highlight

[M8]
Select whether to highlight the program cycle (from the cycle header to the footer) inserted through the inter-
active cycle insertion.
0: Not highlight
1: Highlight
[C80]
Not used.
#8994 =InputOFF:Interact
[M8]
Select whether to disable the [=Input] menu for interactive cycle insertion.
Setting is available with incremental input only.
0: Enable [=Input] menu
1: Disable [=Input] menu
[C80]
Not used.
#8995

Touchop longtaptim

[M8]
Set the time until recognized as long press (long tap).
When releasing a finger within the set time, it is recognized as tap.
0: 800 (ms)
1: 1000
2: 1500
3: 2000
[C80]
Not used.
(PR) #8996

Simple program ON

[M8]
Select whether to enable the simple programming function.
0: Disable
1: Enable
[C80]
Not used.
313 IB-1501279-H