M800/M80/E80/C80 Series Alarm/Parameter Manual
15 User Parameters
#8969
Tool offset type 1
Specify the display item for the 1st column (type) and 2nd column (compensation amount) on the right side
of the tool management screen list display.
The setting value and display item are specified as follows.
(Setting value): (1st column) / (2nd column)
· Tool compensation type I
0-11 : H (Compensation No.) / Length compensation
· Tool compensation type II
0,5-11 : H (Compensation No.) / Length compensation
1 : H (Compensation No.) / Length compensation
2 : D (Compensation No.) / Radius compensation
3 : +H (Compensation No.) / Length wear
4 : +D (Compensation No.) / Radius wear
· Tool compensation type III
0 : (Axis name (1st axis))(Compensation No.) / 1st axis tool length
1 : (Axis name (1st axis))(Compensation No.) / 1st axis tool length
2 : (Axis name (2nd axis))(Compensation No.) / 2nd axis tool length
3 : (Axis name (Additional axis))(Compensation No.) / Additional axis tool length
4 : +(Axis name (1st axis))(Compensation No.) / 1st axis wear
5 : +(Axis name (2nd axis))(Compensation No.) / 2nd axis wear
6 : +(Axis name (Additional axis))(Compensation No.) / Additional axis wear
7 : R / Nose R
8 : +R / R wear
9 : P / Point
10 : (Axis name (2nd additional axis))(Compensation No.) / 2nd additional axis tool length
11 : +(Axis name (2nd additional axis))(Compensation No.) / 2nd additional axis wear
---Setting range---
0 to 11
IB-1501279-H
308