R-Navi Graphic Dir; Ncmemory Date Disp - Mitsubishi Electric M800 Series Manual

M800/M80/E80/C80 Series Alarm/Parameter Manual
15 User Parameters
#8980

R-Navi graphic dir

[M8]
Specify the coordinate system direction of the workpiece graphics (machining surface graphics) to be dis-
played on the R-Navi surface list screen or surface selection screen.
(Note) The angle (degrees) is a CCW rotation when viewed from the positive end of the height axis.
---Setting range---
0: XYZ 0°
1: YZX 0°
2: ZXY 0°
3: XYZ 90°
4: YZX 90°
5: ZXY 90°
6: XYZ 180°
7: YZX 180°
8: ZXY 180°
9: XYZ 270°
10: YZX 270°
11: ZXY 270°
[C80]
Not used.
#8981

NCmemory date disp

[M8]
Specify the display items when displaying the updated time and date of the file on the "Date / Comment" if
NC memory is selected on the program list display.
0: Displays the program comment. (Conventional operation)
1: Displays the updated time and date.
(Note) When multi-part system program management is valid, program comment display is specified, regard-
less of this setting.
[C80]
Not used.
#8982 CheckSmltns$1Invld
[M8]
In the check method 2 of graphic check, checking for 1st part system is invalid.
0: Enable the check. (1st part system is the check target)
1: Disable the check. (1st part system is not the check target)
#8983 CheckSmltns$2Invld
[M8]
In the check method 2 of graphic check, checking for 2nd part system is invalid.
0: Enable the check. (2nd part system is the check target)
1: Disable the check. (2nd part system is not the check target)
#8984 CheckSmltns$3Invld
[M8]
In the check method 2 of graphic check, checking for 3rd part system is invalid.
0: Enable the check. (3rd part system is the check target)
1: Disable the check. (3rd part system is not the check target)
311 IB-1501279-H