Safety I/O Assignment Parameters - Mitsubishi Electric M800 Series Manual

M800/M80/E80/C80 Series Alarm/Parameter Manual
16 Machine Parameters

16.31 Safety I/O Assignment Parameters

(PR) #51501+10(n-1)
[M8]
Specify the channel No. to which the nth safety I/O unit is connected. (n=1 to 8)
* When set to "0", the RIO assignment parameters of the nth station are all disabled.
---Setting range---
0, 1 to 3
[C80]
Specify the channel No. to which the nth safety I/O unit is connected. (n=1 to 3)
* When set to "0", the RIO assignment parameters of the nth station are all disabled.
---Setting range---
0,1
(PR) #51502+10(n-1)
[M8]
Specify the station No. of the nth safety I/O unit. (n=1 to 8)
* Set this parameter to the same value as of the rotary switch on the safety I/O unit to which the device is
assigned.
---Setting range---
0 to 63
[C80]
Specify the station No. of the nth safety I/O unit. (n=1 to 3)
* Set this parameter to the same value as of the rotary switch on the safety I/O unit to which the device is
assigned.
---Setting range---
0 to 3
(PR) #51503+10(n-1)
[M8]
Specify the name of the DI assignment devices of the nth safety I/O unit. (n=1 to 8)
* When set to "0", the name is left blank.
---Setting range---
0, X, ZR
[C80]
Specify the name of the DI assignment devices of the nth safety I/O unit. (n=1 to 3)
* When set to "0", the name is left blank.
---Setting range---
0, X
RIO CH No. #n
RIO Station No. #n
DI dev name #n
703
Target channel number #n
Target station number #n
DI device name #n
IB-1501279-H