Mitsubishi Electric M800 Series Manual page 696

M800/M80/E80/C80 Series Alarm/Parameter Manual
16 Machine Parameters
#12872 aux_PSW1dog2
Set "PSW1 area setting" 1 and 2 to specify the area where the position switch 1 will turn ON when the ma-
chine is positioned.
Whether the value of setting 1 is larger than setting 2 (or vice versa) does not affect the position switch op-
eration.
For rotary axes, the output turns ON in the area excluding 0.000 degree.
---Setting range---
-99999.999 to 99999.999(° or mm)
#12873 aux_PSW2dog1
Set "PSW2 area setting" 1 and 2 to specify the area where the position switch 2 will turn ON when the ma-
chine is positioned.
Whether the value of setting 1 is larger than setting 2 (or vice versa) does not affect the position switch op-
eration.
For rotary axes, the output turns ON in the area excluding 0.000 degree.
---Setting range---
-99999.999 to 99999.999(° or mm)
#12874 aux_PSW2dog2
Set "PSW2 area setting" 1 and 2 to specify the area where the position switch 2 will turn ON when the ma-
chine is positioned.
Whether the value of setting 1 is larger than setting 2 (or vice versa) does not affect the position switch op-
eration.
For rotary axes, the output turns ON in the area excluding 0.000 degree.
---Setting range---
-99999.999 to 99999.999(° or mm)
#12875 aux_PSW3dog1
Set "PSW3 area setting" 1 and 2 to specify the area where the position switch 3 will turn ON when the ma-
chine is positioned.
Whether the value of setting 1 is larger than setting 2 (or vice versa) does not affect the position switch op-
eration.
For rotary axes, the output turns ON in the area excluding 0.000 degree.
---Setting range---
-99999.999 to 99999.999(° or mm)
#12876 aux_PSW3dog2
Set "PSW3 area setting" 1 and 2 to specify the area where the position switch 3 will turn ON when the ma-
chine is positioned.
Whether the value of setting 1 is larger than setting 2 (or vice versa) does not affect the position switch op-
eration.
For rotary axes, the output turns ON in the area excluding 0.000 degree.
---Setting range---
-99999.999 to 99999.999(° or mm)
#12877 aux_PSW4dog1
Set "PSW4 area setting" 1 and 2 to specify the area where the position switch 4 will turn ON when the ma-
chine is positioned.
Whether the value of setting 1 is larger than setting 2 (or vice versa) does not affect the position switch op-
eration.
For rotary axes, the output turns ON in the area excluding 0.000 degree.
---Setting range---
-99999.999 to 99999.999(° or mm)
PSW1 area setting 2
PSW2 area setting 1
PSW2 area setting 2
PSW3 area setting 1
PSW3 area setting 2
PSW4 area setting 1
679 IB-1501279-H