M800/M80/E80/C80 Series Alarm/Parameter Manual
15 User Parameters
#9522
DEV4 EIA CODE ]
[M8]
Set the code in hexadecimal, which does not duplicate the existing EIA codes, for the special code " ] ".
When output with EIA code, data can be output using the alternate code in which the special ISO code, not
included in EIA, is specified.
---Setting range---
0 to FF (hexadecimal)
#9523
DEV4 EIA CODE #
[M8]
Set the code in hexadecimal, which does not duplicate the existing EIA codes, for the special code "#".
When output with EIA code, data can be output using the alternate code in which the special ISO code, not
included in EIA, is specified.
---Setting range---
0 to FF (hexadecimal)
#9524
DEV4 EIA CODE *
[M8]
Set the code in hexadecimal, which does not duplicate the existing EIA codes, for the special code "*".
When output with EIA code, data can be output using the alternate code in which the special ISO code, not
included in EIA, is specified.
---Setting range---
0 to FF (hexadecimal)
#9525
DEV4 EIA CODE =
[M8]
Set the code in hexadecimal, which does not duplicate the existing EIA codes, for the special code "=".
When output with EIA code, data can be output using the alternate code in which the special ISO code, not
included in EIA, is specified.
---Setting range---
0 to FF (hexadecimal)
#9526
DEV4 EIA CODE :
[M8]
Set the code in hexadecimal, which does not duplicate the existing EIA codes, for the special code " : ".
When output with EIA code, data can be output using the alternate code in which the special ISO code, not
included in EIA, is specified.
---Setting range---
0 to FF (hexadecimal)
#9527
DEV4 EIA CODE $
[M8]
Set the code in hexadecimal, which does not duplicate the existing EIA codes, for the special code "$".
When output with EIA code, data can be output using the alternate code in which the special ISO code, not
included in EIA, is specified.
---Setting range---
0 to FF (hexadecimal)
#9528
DEV4 EIA CODE !
[M8]
Set the code in hexadecimal, which does not duplicate the existing EIA codes, for the special code "!".
When output with EIA code, data can be output using the alternate code in which the special ISO code, not
included in EIA, is specified.
---Setting range---
0 to FF (hexadecimal)
IB-1501279-H
250