3D Tool Ofs Select; Mass Edit Select; T-Reg-Dup Check; Hide Edit-Io Menu - Mitsubishi Electric M800 Series Manual

M800/M80/E80/C80 Series Alarm/Parameter Manual
15 User Parameters
#8920

3D tool ofs select

[M8]
Select the method to calculate the drawing position when drawing a solid.
With 3D drawing, the drawing position (tool tip position) is calculated with the method designated with this
parameter, and the image is drawn.
0: For tool radius compensation, use the tool compensation amount set in tool compensation screen. For
tool length, use the value in tool set window. (for tool length measurement type I)
1: Use the tool compensation amount set in tool compensation screen for both tool radius and tool length
compensation. (for tool length measurement type II)
2: Use the value set in tool set window for both tool radius and tool length compensation. (for tool length
measurement type I)
3: Use the value set in tool set window for both tool radius and tool length compensation. (for tool length
measurement type II)
[C80]
Not used.
#8921

Mass Edit select

[M8]
Select the editing mode for the machining programs saved in HD, FD, and memory card.
When the program size is 1.0MB (When "#8910 Edit Undo" is invalid, 2.0MB) or more, mass-editing will be
applied.
0: Regular editing mode
1: Mass-editing mode
[C80]
Not used.
#8922

T-reg-dup check

Set whether to enable the duplication check in registering tools to magazine pots, and in setting tool Nos. for
spindle/standby.
0: Duplication check valid for all valid magazines
1: Duplication check invalid
2: Duplication check valid only for the selected magazine
(PR) #8923

Hide Edit-IO menu

Set whether to enable the edit-in/out menu. When disabled, the edit-input/output menu won't appear. How-
ever, the maintenance-in/out menu is always enabled regardless of this parameter setting.
0: Enable
1: Disable
#8924 MEAS. CONFIRM MSG
Select whether to display a confirming message when attempting to write compensation data for tool mea-
surement, or coordinate system data for workpiece measurement.
However, the confirmation message will not appear in L system tool measurement simple mode "#8957 T
meas (L)-Simple".
0: Not display a confirming message
1: Display a confirming message
IB-1501279-H 298