Mitsubishi Electric M800 Series Manual page 255

M800/M80/E80/C80 Series Alarm/Parameter Manual
15 User Parameters
#9221 DEV1 EIA CODE [
[M8]
Set the code in hexadecimal, which does not duplicate the existing EIA codes, for the special code " [ ".
When output with EIA code, data can be output using the alternate code in which the special ISO code, not
included in EIA, is specified.
---Setting range---
0 to FF (hexadecimal)
#9222 DEV1 EIA CODE ]
[M8]
Set the code in hexadecimal, which does not duplicate the existing EIA codes, for the special code " ] ".
When output with EIA code, data can be output using the alternate code in which the special ISO code, not
included in EIA, is specified.
---Setting range---
0 to FF (hexadecimal)
#9223 DEV1 EIA CODE #
[M8]
Set the code in hexadecimal, which does not duplicate the existing EIA codes, for the special code "#".
When output with EIA code, data can be output using the alternate code in which the special ISO code, not
included in EIA, is specified. .
---Setting range---
0 to FF (hexadecimal)
#9224 DEV1 EIA CODE *
[M8]
Set the code in hexadecimal, which does not duplicate the existing EIA codes, for the special code "*".
When output with EIA code, data can be output using the alternate code in which the special ISO code, not
included in EIA, is specified.
---Setting range---
0 to FF (hexadecimal)
#9225 DEV1 EIA CODE =
[M8]
Set the code in hexadecimal, which does not duplicate the existing EIA codes, for the special code "=".
When output with EIA code, data can be output using the alternate code in which the special ISO code, not
included in EIA, is specified.
---Setting range---
0 to FF (hexadecimal)
#9226 DEV1 EIA CODE :
[M8]
Set the code in hexadecimal, which does not duplicate the existing EIA codes, for the special code " : ".
When output with EIA code, data can be output using the alternate code in which the special ISO code, not
included in EIA, is specified.
---Setting range---
0 to FF (hexadecimal)
#9227 DEV1 EIA CODE $
[M8]
Set the code in hexadecimal, which does not duplicate the existing EIA codes, for the special code "$".
When output with EIA code, data can be output using the alternate code in which the special ISO code, not
included in EIA, is specified.
---Setting range---
0 to FF (hexadecimal)
IB-1501279-H 238