M800/M80/E80/C80 Series Alarm/Parameter Manual
3 Servo/Spindle Alarms (S)
3.4 Parameter Errors (S51)
S51
Parameter error
Details
Servo parameter setting data is illegal.The alarm No. is the No. of the servo parameter where the warning oc-
curred.
Remedy
Check the descriptions for the appropriate servo parameters and correct them.
S51
Parameter error
Details
Spindle parameter setting data is illegal.
The alarm No. is the No. of the spindle parameter where the warning occurred.
Remedy
Check the descriptions for the appropriate spindle parameters and correct them.
Even when the parameter is set to a value within the setting range, an error is occurring due to the hardware
compatibility or specifications or in relation to several other parameters.
Refer to "Parameter Numbers during Initial Parameter Error" of each drive unit instruction manual for details.
2201-2264
13001-13256
59
(Axis name)
(Axis name)
IB-1501279-H