Mitsubishi Electric M800 Series Manual page 459

M800/M80/E80/C80 Series Alarm/Parameter Manual
16 Machine Parameters
#1405 M_mode(SMLK)
M code output (during high-speed simple program check)
Select the M code output method to be applied during high-speed simple program check.
0: Output the M codes registered in #1449 to #1464 M[M511-000](SMLK), but not output unregistered M
codes.
M512 or subsequent M codes are not output.
1: Output the M codes unregistered in #1449 to #1464 M[M511-000](SMLK), but not output those regis-
tered.
M512 and subsequent M codes are all output.
#1406 S_mode(SMLK)
S code output (during high-speed simple program check)
Select the S code output method to be applied during high-speed simple program check.
0: Not output S code
1: Output S code
#1407 T_mode(SMLK)
T code output (during high-speed simple program check)
Select the T code output method to be applied during high-speed simple program check.
0: Not output T code
1: Output T code
#1408 M2_mode(SMLK)
2nd miscellaneous code output (during high-speed simple program check)
Select the 2nd M code output method to be applied during high-speed simple program check.
0: Not output 2nd M code
1: Output 2nd M code
#1411 M_wait[M031-000]
Register an M code that needs special operation.
Each bit of the setting value corresponds to the M code number.
(Example) To register M05, set 00000020 in #1411.
(Note) Note that the registered M code operation varies according to M_mode (#1401).
---Setting range---
0 to FFFFFFFF
Set this in hexadecimal format.
#1412 M_wait[M063-032]
Register an M code (32 to 63) that needs special operation.
Each bit of the setting value corresponds to the M code number.
(Example) To register M05, set 00000020 in #1411.
(Note) Note that the registered M code operation varies according to M_mode (#1401).
---Setting range---
0 to FFFFFFFF
Set this in hexadecimal format.
IB-1501279-H
M code output (during high-speed simple program
check)
S code output (during high-speed simple program
check)
T code output (during high-speed simple program
check)
2nd miscellaneous code output (during high-speed
simple program check)
Special operation registration M code
Special operation registration M code
442