Mitsubishi Electric M800 Series Manual page 655

M800/M80/E80/C80 Series Alarm/Parameter Manual
16 Machine Parameters
#7201 G[01] Code
Set the G code to be used when calling the macro with a G command.
Do not set a G code used in the system.
G101 to G110 and G200 to G202 are user macro I codes. However, if a parameter is set for the G code call
code, the G code call will have the priority, and these cannot be used as the user macro I.
---Setting range---
1 to 999
#7202 G[01] Type
Set the macro call out type.
0: Equivalent to M98 P ∆∆∆∆ ;
1: Equivalent to G65 P ∆∆∆∆ ;
2: Equivalent to G66 P ∆∆∆∆ ;
3: Equivalent to G66.1 P ∆∆∆∆ ;
---Setting range---
0 to 3
#7203 G[01] Program No.
Set the No. of the program or file name to be called out. The file name can contain up to 32 characters.
---Setting range---
Program name or file name (up to 32 characters)
#7211 G[02] Code
The setting method is same as "#7201".
#7212 G[02] Type
The setting method is same as "#7202".
#7213 G[02] Program No.
The setting method is same as "#7203".
#7221 G[03] Code
The setting method is same as "#7201".
#7222 G[03] Type
The setting method is same as "#7202".
#7223 G[03] Program No.
The setting method is same as "#7203".
#7231 G[04] Code
The setting method is same as "#7201".
#7232 G[04] Type
The setting method is same as "#7202".
#7233 G[04] Program No.
The setting method is same as "#7203".
#7241 G[05] Code
The setting method is same as "#7201".
#7242 G[05] Type
The setting method is same as "#7202".
#7243 G[05] Program No.
The setting method is same as "#7203".
#7251 G[06] Code
The setting method is same as "#7201".
#7252 G[06] Type
The setting method is same as "#7202".
IB-1501279-H 638