Mitsubishi Electric M800 Series Manual page 650

M800/M80/E80/C80 Series Alarm/Parameter Manual
16 Machine Parameters
#6471 R7835-Low
[M8]
Set to "0".
[C80]
bit7-1: Set to "0".
bit0: ERROR LED display
Select the display specifications of ERROR LED (red) when only minor errors occur.
0: Turning OFF when only minor errors occur.
1: Turning ON when only minor errors occur.
#6472 R7835-High
Set to "0".
#6473-6474 R7836-Low - R7836-High
High-speed output specification 3
#6475-6476 R7837-Low - R7837-High
High-speed output specification 4
#6477-6480 R7838-Low - R7839-High
Set to "0".
#6481-6496 R7840-Low - R7847-High
This is reserved for debugging by MITSUBISHI. Set to "0".
#6497-6596 R7848-Low - R7897-High
These bit type parameters are used in the user PLC (ladder).
Bit selection
Bit selection
Bit selection
Bit selection
Bit selection
Bit selection
Bit selection
633 IB-1501279-H