Mitsubishi Electric M800 Series Manual page 698

M800/M80/E80/C80 Series Alarm/Parameter Manual
16 Machine Parameters
#12884 aux_PSW7dog2
Set "PSW7 area setting" 1 and 2 to specify the area where the position switch 7 will turn ON when the ma-
chine is positioned.
Whether the value of setting 1 is larger than setting 2 (or vice versa) does not affect the position switch op-
eration.
For rotary axes, the output turns ON in the area excluding 0.000 degree.
---Setting range---
-99999.999 to 99999.999(° or mm)
#12885 aux_PSW8dog1
Set "PSW8 area setting" 1 and 2 to specify the area where the position switch 8 will turn ON when the ma-
chine is positioned.
Whether the value of setting 1 is larger than setting 2 (or vice versa) does not affect the position switch op-
eration.
For rotary axes, the output turns ON in the area excluding 0.000 degree.
---Setting range---
-99999.999 to 99999.999(° or mm)
#12886 aux_PSW8dog2
Set "PSW8 area setting" 1 and 2 to specify the area where the position switch 8 will turn ON when the ma-
chine is positioned.
Whether the value of setting 1 is larger than setting 2 (or vice versa) does not affect the position switch op-
eration.
For rotary axes, the output turns ON in the area excluding 0.000 degree.
---Setting range---
-99999.999 to 99999.999(° or mm)
#12887 aux_PSW9dog1
Set "PSW9 area setting" 1 and 2 to specify the area where the position switch 9 will turn ON when the ma-
chine is positioned.
Whether the value of setting 1 is larger than setting 2 (or vice versa) does not affect the position switch op-
eration.
For rotary axes, the output turns ON in the area excluding 0.000 degree.
---Setting range---
-99999.999 to 99999.999(° or mm)
#12888 aux_PSW9dog2
Set "PSW9 area setting" 1 and 2 to specify the area where the position switch 9 will turn ON when the ma-
chine is positioned.
Whether the value of setting 1 is larger than setting 2 (or vice versa) does not affect the position switch op-
eration.
For rotary axes, the output turns ON in the area excluding 0.000 degree.
---Setting range---
-99999.999 to 99999.999(° or mm)
#12889 aux_PSW10dog1
Set "PSW10 area setting" 1 and 2 to specify the area where the position switch 10 will turn ON when the
machine is positioned.
Whether the value of setting 1 is larger than setting 2 (or vice versa) does not affect the position switch op-
eration.
For rotary axes, the output turns ON in the area excluding 0.000 degree.
---Setting range---
-99999.999 to 99999.999(° or mm)
PSW7 area setting 2
PSW8 area setting 1
PSW8 area setting 2
PSW9 area setting 1
PSW9 area setting 2
PSW10 area setting 1
681 IB-1501279-H