ABB ACS560 Firmware Manual page 167

No. Name/Value
01.51 Previous hour kWh
0.00... 1000000.00
kWh
01.52 Current day kWh
0.00... 1000000.00
kWh
01.53 Previous day kWh
0.00... 1000000.00
kWh
01.54 Cumulative inverter
energy
-200000000.0...
200000000.0 kWh
01.55 Inverter GWh
counter (resettable)
0...65535 GWh
01.56 Inverter MWh
counter (resettable)
0....1000 MWh
01.57 Inverter MWh
counter (resettable)
0...1000 kWh
01.58 Inverter kWh
counter (resettable)
-200000000.0...
200000000.0 kWh
01.61 Abs motor speed
used
0.00... 30000.00
rpm
Description
Previous hour energy consumption. The value
hour kWh is stored here when its values has been cumulated
for 60 minutes. The value is set to the value before the power
cycle when the drive is again up and running.
Energy.
Current day energy consumption. This is the energy of the
last 24 hours (not necessarily continuous) the drive has been
running, not the energy of a calendar day. The value is set to
the value before the power cycle when the drive is again up
and running.
Energy.
Previous day energy consumption. The value
day kWh is stored here when its value has been cumulated
for 24 hours. The value is set to the value before the power
cycle when the drive is again up and running.
Energy.
Amount of energy that has passed through the drive (in either
direction) in full kilowatt-hours. The minimum value is zero.
Energy in kWh.
Amount of energy that has passed through the drive (in either
direction) in full gigawatt-hours. The minimum value is zero.
You can reset the value by setting it to zero. Resetting any of
parameters 01.55...01.58
Energy in GWh.
Amount of energy that has passed through the drive (in either
direction) in full megawatt-hours. Whenever the counter rolls
over, 01.55 Inverter GWh counter (resettable)
The minimum value is zero.
You can reset the value by setting it to zero. Resetting any of
parameters 01.55...01.58
Energy in MWh.
Amount of energy that has passed through the drive (in either
direction) in full kilowatt-hours. Whenever the counter rolls
over, 01.56 Inverter MWh counter (resettable)
The minimum value is zero.
You can reset the value by setting it to zero. Resetting any of
parameters 01.55...01.58
Energy in kWh.
Amount of energy that has passed through the drive (in either
direction) in full kilowatt-hours. The minimum value is zero.
You can reset the value by setting it to zero. Resetting any of
parameters 01.55...01.58
Energy in kWh.
Absolute value of parameter
Estimated motor speed.
01.50 Current
01.52 Current
resets all of them.
is incremented.
resets all of them.
is incremented.
resets all of them.
resets all of them.
01.01 Motor speed used.
Parameters 167
Def/FbEq16
-
1 = 1 kWh
-
1 = 1 kWh
-
1 = 1 kWh
-
10 = 1 kWh
-
1 = 1 GWh
-
1 = 1 MWh
-
10 = 1 kWH
-
10 = 1 kWH
-
See par.
46.01