ABB ACS560 Firmware Manual page 180

180 Parameters
No. Name/Value
10.03 DI force selection
Bit Value
0 1 = Force DI1 to value of bit 0 of parameter
1 1 = Force DI2 to value of bit 1 of parameter
2 1 = Force DI3 to value of bit 2 of parameter
3 1 = Force DI4 to value of bit 3 of parameter
4 1 = Force DI5 to value of bit 4 of parameter
5 1 = Force DI6 to value of bit 5 of parameter
6...15 Reserved
0b0000...0b1111
10.04 DI forced data
Bit Value
0 Force the value of this bit to D1, if so defined in parameter
1 Force the value of this bit to D3, if so defined in parameter
2 Force the value of this bit to D3, if so defined in parameter
3 Force the value of this bit to D4, if so defined in parameter
4 Force the value of this bit to D5, if so defined in parameter
5 Force the value of this bit to D6, if so defined in parameter
6...15 Reserved
0b0000...0b1111
10.05 DI1 ON delay
*DI status
**Delayed DI status
t = 10.05 DI1 ON delay
On
t = 10.06 DI1 OFF delay
Off
*Electrical status of digital input. Indicated by
**Indicated by 10.02 DI delayed
0.0 ... 3000.0 s
10.06 DI1 OFF delay
0.0 ... 3000.0 s
Description
The electrical statuses of the digital inputs can be overridden
for e.g. testing purposes. A bit in parameter
data is provided for each digital input, and its value is applied
whenever the corresponding bit in this parameter is 1.
Note: Boot and power cycle reset the force selections
(parameters 10.03 and 10.04).
Override selection for digital inputs.
Allows the data value of a forced digital input to be changed
from 0 to 1. It is only possible to force an input that has been
selected in parameter 10.03 DI force
Bit 0 is the forced value for DI1; bit 5 is the forced value for
the DI6.
Forced values of digital inputs.
Defines the activation delay for digital input DI1.
t t
On Off
10.01 DI
status.
Activation delay for DI1.
Defines the deactivation delay for digital input DI1. See
parameter 10.05 DI1 ON
Deactivation delay for DI1.
10.04 DI forced
10.04 DI forced data. (0 = Normal mode)
10.04 DI forced data. (0 = Normal mode)
10.04 DI forced data. (0 = Normal mode)
10.04 DI forced data. (0 = Normal mode)
10.04 DI forced data. (0 = Normal mode)
10.04 DI forced data. (0 = Normal mode)
selection.
10.03 DI force
10.03 DI force
10.03 DI force
10.03 DI force
10.03 DI force
10.03 DI force
t
On
status.
delay.
Def/FbEq16
0b0000
1 = 1
0b0000
selection.
selection.
selection.
selection.
selection.
selection.
1 = 1
0.0 s
1
0
1
0
Time
t
Off
10 = 1 s
0.0 s
10 = 1 s