Terms And Abbreviations - ABB ACS560 Firmware Manual

16 Introduction to the manual

Terms and abbreviations

Term/abbreviation
ACS-BP-S
ACS-AP-x
AI
AO
BACnet™
Brake chopper
Brake resistor
BIO-01
Control board
DC link
DC link capacitors
DI
DPMP-01
DPMP-02/03
Drive
EFB
FBA
FCAN-01
FCNA-01
FECA-01
FENA-01/-11/-21
FEPL-02
FLON-01
FPBA-01
Frame (size)
IGBT
Explanation
Basic control panel, basic operator keypad for communication with the
drive.
Assistant control panel, advanced operator keypad for communication
with the drive.
The ACS560 supports types ACS-AP-I, ACS-AP-S and ACS-AP-W.
Analog input; interface for analog input signals
Analog output; interface for analog output signals
BACnet™ is a registered trademark of American Society of Heating,
Refrigerating and Air-Conditioning Engineers (ASHRAE).
Conducts the surplus energy from the intermediate circuit of the drive to
the brake resistor when necessary. The chopper operates when the DC
link voltage exceeds a certain maximum limit. The voltage rise is
typically caused by deceleration (braking) of a high inertia motor.
Dissipates the drive surplus braking energy conducted by the brake
chopper to heat. Essential part of the brake circuit. See chapter Brake
chopper in the Hardware manual of the drive.
Optional I/O extension module underneath the fieldbus adapter module.
Circuit board in which the control program runs.
DC circuit between rectifier and inverter
Energy storage which stabilizes the intermediate circuit DC voltage
Digital input; interface for digital input signals
Mounting platform for ACS-AP control panel (flange mounting)
Mounting platform for ACS-AP control panel (surface mounting)
Frequency converter for controlling AC motors
Embedded fieldbus
Fieldbus adapter
Optional CANopen adapter module
ControlNet adapter module
Optional EtherCAT adapter module
Optional Ethernet adapter module for EtherNet/IP, Modbus TCP and
PROFINET IO protocols
Ethernet POWERLINK adapter module
L W ® adapter module
ON ORKS
Optional PROFIBUS DP adapter module
Refers to drive physical size, for example R0 and R1. The type
designation label attached to the drive shows the frame of the drive, see
chapter Operation principle and hardware description, section Type
designation label in the Hardware manual of the drive.
Insulated gate bipolar transistor: used for high efficiency and fast
switching