ABB ACS560 Firmware Manual page 220

General purpose drives
Table of Contents

Advertisement

220 Parameters
No.
Name/Value
22.20
Ext2 speed function
Ref1
Add (ref1 + ref2)
Sub (ref1 - ref2)
Mul (ref1 × ref2)
Min (ref1, ref2)
Max (ref1, ref2)
22.21
Constant speed
function
Bit
Name
0
Constant speed
mode
1
Direction
enable
2...15
Reserved
0b0000...0b1111
Description
Selects a mathematical function between the reference
sources selected by parameters
22.19 Ext2 speed
ref2. See diagram at
ref1.
Signal selected by
Ext2 speed ref1
reference 1 as such (no function applied).
The sum of the reference sources is used as speed reference
1.
The subtraction
([22.11 Ext1 speed
ref2]) of the reference sources is used as speed reference 1.
The multiplication of the reference sources is used as speed
reference 1.
The smaller of the reference sources is used as speed
reference 1.
The greater of the reference sources is used as speed
reference 1.
Determines how constant speeds are selected, and whether
the rotation direction signal is considered or not when
applying a constant speed.
Information
1 = Packed: 7 constant speeds are selectable using the three sources
defined by parameters 22.22,
0 = Separate: Constant speeds 1, 2 and 3 are separately activated by
the sources defined by parameters 22.22,
In case of conflict, the constant speed with the smaller number takes
priority.
1 = Start dir: To determine running direction for a constant speed, the
sign of the constant speed setting (parameters 22.26...22.32) is
multiplied by the direction signal (forward: +1, reverse: -1). This
effectively allows the drive to have 14 (7 forward, 7 reverse) constant
speeds if all values in
WARNING: If the direction signal is reverse and the active
constant speed is negative, the drive will run in the forward
direction.
0 = Accord Par: The running direction for the constant speed is
determined by the sign of the constant speed setting (parameters
22.26...22.32).
Constant speed configuration word.
22.18 Ext2 speed ref1
22.18 Ext2 speed
is used as speed
ref1] -
[22.12 Ext1 speed
22.23
and 22.24.
22.23
22.26...22.32
are positive.
Def/FbEq16
Ref1
and
0
1
2
3
4
5
0b0001
and
22.24
respectively.
1 = 1

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents