ABB ACS560 Firmware Manual page 257

No. Name/Value
30.36 Speed limit
selection
Not selected
Selected
Ext1 active
Ext2 active
Torque control
DI1
DI2
DI3
DI4
DI5
Description
Selects a source that switches between two different
predefined adjustable speed limit sets.
0 = minimum speed limit defined by
speed limit defined by 30.12
1 = minimum speed limit selected by
speed limit defined by 30.38
The user can define two sets of speed limits, and switch
between the sets using a binary source such as a digital
input.
The user can define two sets of speed limits, and switch
between the sets using a binary source such as a digital
input.
The first set of limits is defined by parameters
speed and 30.12 Maximum
selector parameters for both the minimum (30.37) and
maximum (30.38) limits that allows the use of a selectable
analog source (such as an analog input).
30.37
0
AI1
AI2
Minimum
speed
Other
30.11
30.38
0
AI1
AI2
Maximum
speed
Other
30.12
Adjustable speed limits are disabled.
(Minimum speed limit defined by
maximum speed limit defined by
active).
Adjustable speed limits are enabled.
(Minimum speed limit defined by
source and maximum speed limit defined by
speed source are active).
Adjustable speed limits are enabled if EXT1 is active.
Adjustable speed limits are enabled if EXT2 is active.
Adjustable speed limits are enabled if Torque control mode
(vector motor control) is active.
Digital input DI1 (10.02 DI delayed
Digital input DI2 (10.02 DI delayed
Digital input DI3 (10.02 DI delayed
Digital input DI4 (10.02 DI delayed
Digital input DI5 (10.02 DI delayed
30.11 and maximum
are active
30.37 and maximum
are active.
30.11 Minimum
speed. The second set has
30.36
1
User-defined
0
minimum speed
limit
30.36
1
User-defined
0
maximum speed
limit
30.11 Minimum speed
30.12 Maximum speed
30.37 Min speed source
30.38 Max
status, bit 0).
status, bit 1).
status, bit 2).
status, bit 3).
status, bit 4).
Parameters 257
Def/FbEq16
Not selected
0
and
are
1
2
3
4
5
6
7
8
9