ABB ACS560 Firmware Manual page 294

294 Parameters
No. Name/Value
37.21 ULC underload
point 1
-1600.0...1600.0%
37.22 ULC underload
point 2
-1600.0...1600.0%
37.23 ULC underload
point 3
-1600.0...1600.0%
37.24 ULC underload
point 4
-1600.0...1600.0%
37.25 ULC underload
point 5
-1600.0...1600.0%
37.31 ULC overload point
1
-1600.0...1600.0%
37.32 ULC overload point
2
-1600.0...1600.0%
37.33 ULC overload point
3
-1600.0...1600.0%
37.34 ULC overload point
4
-1600.0...1600.0%
37.35 ULC overload point
5
-1600.0...1600.0%
37.41 ULC overload timer
0.0...10000.0 s
Description
Defines the first of the five points on the Y-axis that together
with the corresponding point on the X-axis
table point 1...37.15 ULC speed table point
underload (lower) curve.
The following conditions must be fulfilled:
• 37.21 ULC underload point 1
• 37.22 ULC underload point 2
• 37.23 ULC underload point 3
• 37.24 ULC underload point 4
• 37.25 ULC underload point 5
Underload point.
Defines the second underload point.
See parameter 37.21 ULC underload point
Underload point.
Defines the third underload point.
See parameter 37.21 ULC underload point 1
Underload point.
Defines the fourth underload point.
See parameter 37.21 ULC underload point 1
Underload point.
Defines the fifth underload point.
See parameter 37.21 ULC underload point 1
Underload point.
Defines the first of the five points on the Y-axis that together
with the corresponding point on the X-axis
table point 1...37.15 ULC speed table point
overload (higher) curve.
At each of the five points the value of the underload curve
point must be equal to or smaller than the value of the
overload curve point. See parameter
point 1.
Overload point.
Defines the second overload point.
See parameter 37.31 ULC overload point
Overload point.
Defines the third overload point.
See parameter 37.31 ULC overload point
Overload point.
Defines the fourth overload point.
See parameter 37.31 ULC overload point
Overload point.
Defines the fifth overload point.
See parameter 37.31 ULC overload point
Overload point.
Defines the time period for which time the monitored signal
must remain continuously over the overload curve.
Time.
(37.11 ULC speed
5) define the
<= 37.31 ULC overload point 1
<= 37.32 ULC overload point 2
<= 37.33 ULC overload point 3
<= 37.34 ULC overload point 4
<= 37.35 ULC overload point 5
1.
(37.11 ULC speed
5) define the
37.21 ULC underload
1.
1.
1.
1.
Def/FbEq16
10.0%
1 = 1%
15.0%
1 = 1%
25.0%
1 = 1%
30.0%
1 = 1%
30.0%
1 = 1%
300.0%
1 = 1%
300.0%
1 = 1%
300.0%
1 = 1%
300.0%
1 = 1%
300.0%
1 = 1%
20.0 s
1 = 1 s