Configuring Via Parameters - ABB ACS560 Firmware Manual

40 Program features
and protection functions. Control program functions are configured and programmed
with parameters.


Configuring via parameters

Parameters configure all of the standard drive operations and can be set via
• the control panel, as described in chapter
• the Drive composer PC tool, see chapter
• the automation builder drive manager, see
builder drive manager
• the fieldbus interface, as described in chapters
embedded fieldbus interface (EFB)
adapter.
All parameter settings are stored automatically to the permanent memory of the drive.
However, if an external +24 V DC power supply is used for the drive control unit, it is
highly recommended to force a save by using parameter
manually before powering down the control unit after any parameter changes have
been made.
If necessary, the default parameter values can be restored by parameter
Parameter restore.
Speed control
Torque control
Frequency control
Drive logic
I/O interface
Fieldbus interface
Protections
or
Using the control panel
Parameterization with drive composer
Parameterization with automation
Fieldbus control through the
and Fieldbus control through a fieldbus
96.07 Parameter save
M
96.06