ABB ACS560 Firmware Manual page 255

No. Name/Value
30.19 Minimum torque 1
-1600.0...0.0%
30.20 Maximum torque 1
0.0...1600.0%
30.21 Min torque 2 source
Zero
AI1 scaled
AI2 scaled
Reserved
PID
Minimum torque 2
Other
30.22 Max torque 2
source
Zero
AI1 scaled
AI2 scaled
Reserved
PID
Maximum torque 2
Other
30.23 Minimum torque 2
-1600.0...0.0%
Description
Defines a minimum torque limit for the drive (in percent of
nominal motor torque).
Minimum torque limit 1.
Defines a maximum torque limit for the drive (in percent of
nominal motor torque).
Maximum torque 1.
Defines the source of the minimum torque limit for the drive
(in percent of nominal motor torque) when
• the source selected by parameter
or
• 30.18 is set to Torque limit set
See diagram at 30.18 Torq lim
Note: Any positive values received from the selected source
are inverted.
None.
12.12 AI1 scaled value (see page 189).
12.22 AI2 scaled value (see page 191).
40.01 Process PID output actual
controller).
30.23 Minimum torque 2.
Source selection (see Terms and abbreviations
Defines the source of the maximum torque limit for the drive
(in percent of nominal motor torque) when
• the source selected by parameter
or
• 30.18 is set to Torque limit set
See diagram at 30.18 Torq lim
Note: Any negative values received from the selected source
are inverted.
None.
12.12 AI1 scaled value (see page 189).
12.22 AI2 scaled value (see page 191).
40.01 Process PID output actual
controller).
30.24 Maximum torque
Source selection (see Terms and abbreviations
Defines the minimum torque limit for the drive (in percent of
nominal motor torque) when
• the source selected by
• 30.18 is set to Torque limit set 2
and
• 30.21 Min torque 2 source
See diagram at 30.18 Torq lim
Minimum torque limit 2.
30.18 Torq lim sel
2.
sel.
(output of the process PID
30.18 Torq lim sel
2.
sel.
(output of the process PID
2.
30.18 Torq lim sel is 1, or
is set to Minimum torque
sel.
Parameters 255
Def/FbEq16
-300.0%
See par.
46.03
300.0%
See par.
46.03
Minimum
torque 2
is 1,
0
1
2
3...14
15
16
on page 162). -
Maximum
torque 2
is 1,
0
1
2
3...14
15
16
on page 162). -
-300.0%
2.
See par.
46.03