Standard Di, Ro - ABB ACS560 Firmware Manual

No. Name/Value
07.36 Drive configuration
2
Bit Name
0 FLON-01
1 FDNA-01
2 FCNA-01
3 CMOD-01
0x0000...0xffff
10

10 Standard DI, RO

10.01 DI status
Bit Name
0 DI1
1 DI2
2 DI3
3 DI4
4 DI5
5 DI6
6...15 Reserved
0b0000...0b1111
10.02 DI delayed status
Bit Name
0 DI1
1 DI2
2 DI3
3 DI4
4 DI5
5 DI6
6...15 Reserved
0b0000...0b1111
Description
Plug 'n' play configuration. Drive automatically detects and
enables any installed fieldbus or C-series option.
Bit
4
5
6
7...15
Drive configuration 2.
Configuration of digital inputs and relay outputs.
Displays the electrical status of digital inputs DI1...DI6. The
activation/deactivation delays of the inputs (if
any are specified) are ignored.
Bits 0...5 reflect the status of DI1...DI6.
Example: 0000000000010011b = DI5, DI2 and DI1 are on,
DI3, DI4 and DI6 are off.
This parameter is read-only.
Description
1 = Digital input 1 is ON.
1 = Digital input 2 is ON.
1 = Digital input 3 is ON.
1 = Digital input 4 is ON.
1 = Digital input 5 is ON.
1 = Digital input 6 is ON.
Status for digital inputs.
Displays the status of digital inputs DI1...DI6. Bits 0...5 reflect
the delayed status of DI1...DI6.
Example: 0000000000010011b = DI5, DI2 and DI1 are on,
DI3, DI4 and DI6 are off.
This word is updated only after a 2 ms activation/deactivation
delay. When the value of a digital input changes, it must
remain the same in two consecutive samples, that is for 2 ms,
for the new value to be accepted.
This parameter is read-only.
Description
1 = Digital input 1 is ON.
1 = Digital input 2 is ON.
1 = Digital input 3 is ON.
1 = Digital input 4 is ON.
1 = Digital input 5 is ON.
1 = Digital input 6 is ON.
Delayed status for digital inputs.
Parameters 179
Def/FbEq16
0x0000
Name
CMOD-02
CPTC-02
CHDI-01
Reserved
1 = 1
0b0000
1 = 1
0b0000
1 = 1