ABB ACS560 Firmware Manual page 225

No. Name/Value
22.74 Motor
potentiometer down
source
22.76 Motor
potentiometer min
value
-32768.00...
32767.00
22.77 Motor
potentiometer max
value
-32768.00...
32767.00
22.78 Motor
potentiometer ramp
up
0.0...3600.0 s
22.79 Motor
potentiometer ramp
down
0.0...3600.0 s
22.80 Motor
potentiometer ref
act
-32768.00...
32767.00
22.86 Speed reference
act 6
-30000.00...
30000.00 rpm
Description
Selects the source of motor potentiometer down signal.
0 = No change
1 = Decrease motor potentiometer value. (If both the up and
down sources are on, the potentiometer value will not
change.)
Note: Motor potentiometer function up/down source control
speed or frequency from zero to maximum speed or
frequency. The running direction can be changed with
parameter 20.04 Ext1 in2
Motor potentiometer macro
see parameter 22.73 Motor potentiometer up
Defines the minimum value of the motor potentiometer.
Note: If vector control mode is used, value of this parameter
must be changed.
Motor potentiometer minimum.
Defines the maximum value of the motor potentiometer.
Note: If vector control mode is used, value of this parameter
must be changed.
Motor potentiometer maximum.
Defines the time required for the motor potentiometer to
change from minimum (22.76) to maximum (22.77).
Motor potentiometer change time.
Defines the time required for the motor potentiometer
to change from maximum (22.77) to minimum (22.76).
Motor potentiometer change time.
The output of the motor potentiometer function. (The motor
potentiometer is configured using parameters 22.71...22.74.)
This parameter is read-only.
Value of motor potentiometer.
Displays the value of the speed reference (EXT1 or EXT2)
that has been selected by
diagram at 22.11 Ext1 speed ref1
on page 486.
This parameter is read-only.
Speed reference after additive 2.
source. See the figure in section
on page 111. For the selections,
source.
19.11 Ext1/Ext2 selection. See
or the control chain diagram
Parameters 225
Def/FbEq16
Not used
-50.00
1 = 1
50.00
1 = 1
40.0 s
10=1
40.0 s
10=1
0.00
1 = 1
-
See par.
46.01