ABB ACS560 Firmware Manual page 358

358 Parameters
No. Name/Value
User3 IO active
User4 IO active
Reserved
User1 backup
User2 backup
User3 backup
User4 backup
96.11 User set save/load
No action
User set I/O mode
Load set 1
Load set 2
Load set 3
Load set 4
Save to set 1
Save to set 2
Save to set 3
Save to set 4
96.12 User set I/O mode
in1
Not selected
Selected
Description
User set 3 has been selected by parameters
I/O mode in1 and 96.13 User set I/O mode
User set 4 has been selected by parameters
I/O mode in1 and 96.13 User set I/O mode
User set 1 has been saved or loaded.
User set 2 has been saved or loaded.
User set 3 has been saved or loaded.
User set 4 has been saved or loaded.
Enables the saving and restoring of up to four custom sets of
parameter settings.
The set that was in use before powering down the drive is in
use after the next power-up.
Notes:
• Some hardware configuration settings, such as I/O
extension module and fieldbus configuration parameters
(groups 14...16, 47, 50...58 and 92...93) are not included
in user parameter sets.
• Parameter changes made after loading a set are not
automatically stored – they must be saved using this
parameter.
• This parameter cannot be changed while the drive is
running
Load or save operation complete; normal operation.
Load user parameter set using parameters
mode in1 and 96.13 User set I/O mode
Load user parameter set 1.
Load user parameter set 2.
Load user parameter set 3.
Load user parameter set 4.
Save user parameter set 1.
Save user parameter set 2.
Save user parameter set 3.
Save user parameter set 4.
When parameter 96.11 User set save/load
I/O mode, selects the user parameter set together with
parameter 96.13 User set I/O mode in2
Status of source Status of source
defined by par. defined by par.
96.12
0
1
0
1
0.
1.
96.12 User set
in2.
96.12 User set
in2.
96.12 User set I/O
in2.
is set to User set
as follows:
User parameter
set selected
96.13
0 Set 1
0 Set 2
1 Set 3
1 Set 4
Def/FbEq16
6
7
8...19
20
21
22
23
No action
0
1
2
3
4
5
18
19
20
21
Not selected
0
1