ABB ACS560 Firmware Manual page 300

300 Parameters
No. Name/Value
Supervision 2
Supervision 3
Other [bit]
40.21 Set 1 internal
setpoint 1
-200000.00...
200000.00
40.22 Set 1 internal
setpoint 2
-200000.00...
200000.00
40.23 Set 1 internal
setpoint 3
-200000.00...
200000.00
40.24 Set 1 internal
setpoint 0
-200000.00...
200000.00
40.26 Set 1 setpoint min
-200000.00...
200000.00
40.27 Set 1 setpoint max
-200000.00...
200000.00
40.28 Set 1 setpoint
increase time
0.0...1800.0 s
40.29 Set 1 setpoint
decrease time
0.0...1800.0 s
40.30 Set 1 setpoint
freeze enable
Not selected
Selected
DI1
DI2
DI3
DI4
DI5
Description
Bit 1 of 32.01 Supervision status
Bit 2 of 32.01 Supervision status
Source selection (see Terms and abbreviations
Internal process setpoint 1. See parameter
internal setpoint sel1.
Internal process setpoint 1.
Internal process setpoint 2. See parameter
internal setpoint sel1.
Internal process setpoint 2.
Internal process setpoint 3. See parameter
internal setpoint sel1.
Internal process setpoint 3.
Internal process setpoint 0. See parameter
internal setpoint sel1.
Internal process setpoint 0.
Defines a minimum limit for the process PID controller
setpoint.
Minimum limit for process PID controller setpoint.
Defines a maximum limit for the process PID controller
setpoint.
Maximum limit for process PID controller setpoint.
Defines the minimum time it takes for the setpoint to increase
from 0% to 100%.
Setpoint increase time.
Defines the minimum time it takes for the setpoint to decrease
from 100% to 0%.
Setpoint decrease time.
Freezes, or defines a source that can be used to freeze, the
setpoint of the process PID controller. This feature is useful
when the reference is based on a process feedback
connected to an analog input, and the sensor must be
serviced without stopping the process.
1 = Process PID controller setpoint frozen
See also parameter 40.38 Set 1 output
Process PID controller setpoint not frozen.
Process PID controller setpoint frozen.
Digital input DI1 (10.02 DI delayed
Digital input DI2 (10.02 DI delayed
Digital input DI3 (10.02 DI delayed
Digital input DI4 (10.02 DI delayed
Digital input DI5 (10.02 DI delayed
(see page 266).
(see page 266).
on page 162). -
40.19 Set 1
40.19 Set 1
40.19 Set 1
40.19 Set 1
freeze.
status, bit 0).
status, bit 1).
status, bit 2).
status, bit 3).
status, bit 4).
Def/FbEq16
22
23
0.00
1 = 1
0.00
1 = 1
0.00
1 = 1
0.00
1 = 1
0.00
1 = 1
200000.00
1 = 1
0.0 s
1 = 1
0.0 s
1 = 1
Not selected
0
1
2
3
4
5
6