ABB ACS560 Firmware Manual page 442

442 Fieldbus control through the embedded fieldbus interface (EFB)
Parameter
28.15 Ext2 frequency
ref1
OTHER SELECTIONS
EFB references can be selected as the source at virtually any signal selector parameter by
selecting Other, then either
SYSTEM CONTROL INPUTS
96.07 Parameter save
manually
Setting for
fieldbus control
EFB ref1
03.09 EFB reference 1
Save (reverts to
Done)
Function/Information
Selects a reference received through the
embedded fieldbus interface as frequency
reference 2.
or 03.10 EFB reference
Saves parameter value changes (including
those made through fieldbus control) to
permanent memory.
2.