ABB ACS560 Firmware Manual page 316

316 Parameters
No. Name/Value
45.04 Saved energy
0.0...214748364.0
kWh
45.05 Saved money
x1000
0...4294967295
thousands
45.06 Saved money
0.00...999.99 units
45.07 Saved amount
0.00...
21474830.08 units
45.08 CO2 reduction in
kilotons
0...65535 metric
kilotons
45.09 CO2 reduction in
tons
0.0...999.9 metric
tons
Description
Energy saved in kWh compared to direct-on-line motor
connection.
If the internal brake chopper of the drive is enabled, all energy
fed by the motor to the drive is assumed to be converted into
heat.
This parameter is read-only (see parameter
calculations reset).
Energy savings in kWh.
Monetary savings in thousands compared to direct-on-line
motor connection. This parameter is incremented when
Saved money rolls over.
This parameter is read-only (see parameter
calculations reset).
Monetary savings in thousands of units.
Monetary savings compared to direct-on-line motor
connection. This value is a calculated by multiplying the
saved energy in kWh by the currently active energy tariff
(45.14 Tariff selection).
When this parameter rolls over, parameter
money x1000 is incremented.
This parameter is read-only (see parameter
calculations reset).
Monetary savings.
Monetary savings compared to direct-on-line motor
connection. This value is a calculated by multiplying the
saved energy in kWh by the currently active energy tariff
(45.14 Tariff selection).
This parameter is read-only (see parameter
calculations reset).
Monetary savings.
Reduction in CO emissions in metric kilotons compared to
2
direct-on-line motor connection. This value is incremented
when parameter 45.09 CO2 reduction in tons
This parameter is read-only (see parameter
calculations reset).
Reduction in CO emissions in metric kilotons.
2
Reduction in CO emissions in metric tons compared to
2
direct-on-line motor connection. This value is calculated by
multiplying the saved energy in MWh by the value of
parameter 45.18 CO2 conversion factor
metric tons/MWh).
When this parameter rolls over, parameter
reduction in kilotons is incremented.
This parameter is read-only (see parameter
calculations reset).
Reduction in CO emissions in metric tons.
2
Def/FbEq16
0.0
45.21 Energy
1 = 1 kWh
0 INR
45.06
45.21 Energy
1 = 1 unit
0.00 INR
45.05 Saved
45.21 Energy
1 = 1 unit
0.00 INR
45.21 Energy
1 = 1 unit
0
rolls over.
45.21 Energy
1 = 1 metric
kiloton
0.0
(by default, 0.5
45.08 CO2
45.21 Energy
1 = 1 metric
ton